How Draw a Building Plan
Outset Describe the plot expanse on the sheet and decide the requirement. Post-obit are the requirements of the basic house,
1 – Kitchen
2 – Bed Room
1 – Drawing Room
1 – Bath plus W/C
1 – Store Room
1 – Dining Room
one – Parking for car
Read More than: Building Structure Stride By Step Procedure
Draw a House Program by Hand Step By Step Guide
1) Commencement, prepare a rough chimera diagram indicating the probable location of the various room in the plot expanse.
two) From that prepare the line plan for a residential edifice before preparing the detailed sketch because culling line plans would give scope for comparison past making changes in the size of some rooms according to the owner's requirements.
Line Programme of Residential Building
How to Draw a House Plan past Manus
two) While preparing the sketch plan, the line plan with reference to the site plan, shape of the plot, north direction, direction of the prevailing current of air, main road and view of surroundings, etc. should exist kept in mind.
iii) The sketch plan should exist prepared on tracing newspaper. Beginners may keep a graph below the tracing paper. This will assist them to save a lot of time.
four) Wall thickness, surface area of each unit, name of the downward location of sanitary units, staircase, flight of steps, landing up and directions, passage width, the position of doors and windows, columns and beams, entrance gate, compound wall, a path from the gate to the edifice, chajjas and canopy projections should be clearly mentioned in the sketch plan.
Read More: Estimation Of A Building With Plan
How to Draw a House Program by Manus
v) Depict all exterior wall lines as light lines by using a 2H pencil.
6) The thickness of the wall should exist drawn as per given framed structures may have external walls of 230 mm thickness and internal walls of 150 mm thickness. And so, the wall thickness in the plan is 230 mm.
Mostly, the wall thickness in the floor plan is 150 mm thick wall including plaster both sides or 200 mm thick wall excluding plastering is better than 230 mm thick wall with plastering.
Similarly, a 100 mm thick wall excluding the plaster thickness is meliorate than a 150 mm thick wall with plastering with reference to strength. (Then, the thickness of the wall in the flooring programme in mm is 230 mm)
Load-bearing structures will take 200 mm to 300 mm thick walls. Any wall having a thickness of less than 200 mm cannot be a load-bearing wall.
7) Written report clear internal dimensions of the rooms and draw lines for internal walls with wall thickness.
8) For public buildings doors and windows open up outside. Hence doors, windows, and ventilators are aligned to be affluent with the outside. For residential and private houses, they open up inside and the door, window, and ventilator frames must be kept flush with the within of the wall. This is to create a full swing of the shutter and maximum clearance through the opening.
9) Written report the movement in the house from one room to some other room or passage through the door and show the shutter with the management of opening by the symbol.
How to Describe a House Program by Hand
Read More: The Standard Room Size & Location In Residential Building
10) Plan door openings judiciously. No shutter should partly or fully block the opening of some other door or window. The space betwixt ii adjacent door openings automatically becomes passage and passage should be always free.
eleven) Draw kitchen platform, sink, built-in closet, W.C. pan (commode), washbasin, staircase, front and rear steps.
12) Verandah column should not obstruct the full view of the primary entrance door or the window of the drawing–room.
13) Projections from walls as sunshades, porches, and beams from the verandah column which are above the sill level of windows are to be shown in dotted lines.
14) Depict extension lines and dimension lines on all sides.
15) Write articulate room dimensions as per the line program (first forth the horizontal axis and next along a vertical axis on the cartoon canvass). In the example of framed structures center to middle and overall dimensions should be shown.
Read More: Building Good day-laws And Standard Dimensions Of Building Units
16) Take every care while choosing the correct place for writing dimensions and names so that they are quite legible and not crowded and should never go conventional symbols/signs out of the room. They should neither go unnoticed nor go eclipsed past the overall dimension of the side must tally with the sum of dimensions in series along the direction.
17) The overall dimension of all the four sides of the building (including off-sets also If any) should be mentioned. (How to Draw a Firm Plan past Manus)
18) Describe a line of 5 mm height, roughly at the center of the room for the championship.
19) Write a complete specification for doors, windows, and ventilators.
20) The arrows to indicate an object should bespeak from the description to the object and not from object to the clarification.
21) Calibration for plan should be written as i cm = i metre merely non as 1 thousand = ane cm. i.e., It should be a fraction but never more than 1.
22) The plan is generally fatigued to a scale of 1:l, 1:100 or 1:200 as per the size of the edifice.
23) Go for conventions and symbols for stone masonry, brick masonry, forest, and physical works, and Chiliad.L., etc. merely after dimensioning and indicating names. Conventions must be in a lighter shade compared to the main drawing (drawn with 2H pencil). The hatching or the other conventional signs should never conceal the dimensions or letters or any other details.
How to Draw a Business firm Programme past Hand
Watch Video: How to Draw Business firm Plan – 1
Y'all Might As well Like
- Building Good day-laws And Standard Dimensions Of Building Units
- Construction Price Per Square Feet Around World
- Construction And Edifice Materials With Market Price
- The Standard Room Size & Location In Residential Edifice
- Load Calculation On Column, Beam, and Slab
Source: https://civiconcepts.com/blog/how-to-draw-a-house-plan-by-hand
0 Response to "How Draw a Building Plan"
Отправить комментарий